Black Box ServSwitch ACU5200A, User Manual

Page: 19 / 30

CHAPTER 3: INSTALLATION
15
extended display. Best performance is achieved when the antennas are clearly visible
and free from obstructions.
2. Connect the extended display’s video input into the ServSwitch Wireless receiver’s
video input (blue connector).
NOTE: The extended display must have a standard 15-pin D-shell RGB analog interface.
3. Connect the extended display’s PS/2 keyboard and mouse (if applicable) into the
ServSwitch Wireless receiver’s keyboard connection (purple connector) and mouse
connection (green connector).
Figure 3-2. ServSwitch Wireless Receiver Installation Example
4. Connect your speakers into the ServSwitch Wireless receiver’s audio output
connection (lime green connector).
5. Connect the ServSwitch Wireless KVM Extender power supply into the ServSwitch
Wireless receiver and into the AC power source.
NOTE: Use only an BLACK BOX-supplied power supply.
6. Connect your monitor’s power supply to appropriate electrical outlets.