Black Box ServSwitch ACU1001A, Manual

Page: 35 / 60

REMOTE UNIT CONFIGURATION & OPERATION
33
Remote Console Commands
Standard and Serial Remote Units use the Scroll Lock key for system commands. The
following table lists the commands available at a remote console:
Command Key Sequence
Reset Keyboard
and Mouse PS/2 versions: <Scroll Lock>
SUN versions: <Right Shift> + <Scroll Lock>
Reset the remote console’s keyboard and mouse. You may need to do this if you
have plugged a keyboard or mouse into a powered Remote Unit and it has not
initialized correctly.
Mouse Recovery
PS/2 versions only Hold down Left and Right Mouse buttons then
press and release <Scroll Lock>
Use this command if you experience erratic movement of the mouse pointer or
you have lost mouse movement after hot plugging the Local Unit into the CPU.
In the case of erratic mouse movement, you may need to enter the command a
number of times to re-synchronize the mouse signal. Alternatively, stop moving
the mouse for a few seconds and the operating system’s mouse drivers may
automatically re-synchronize the signal. If the Local Unit has been hot-plugged,
this command will issue a request to the OS to initialize the mouse.
Use this
command with care .
Activate Console
Dual Access models only Any key or (optionally) mouse action
Gain control of CPU from local console. Only operates if inactivity timeout
period has expired.
Enter Private Mode
ACU1005A only <Left Control> + <Scroll Lock>
Enter/Exit Private Mode at SUN remote console.