Black Box ServSelect IP KV120A, Manual

Page: 36 / 48

SERVSELECT™ IP INSTALLER/USER GUIDE
34
CHAPTER 4: ANALOG PORT OPERATION
35
To start the scan mode:
1. Press
Print Screen.
The Main dialog box will appear.
2. Click Commands . The Command dialog box appears.
Figure 4-17. Command Dialog Box
3. Select Scan Enable in the Command dialog box.
4. Click X to close the Command dialog box.
NOTE
:
Scanning will commence when the Main dialog box or flag is displayed. Scanning is inhibited in
any other the OSD dialog box.
To cancel scan mode:
1. Select a server if the OSD is open.
-or-
Move the mouse or press any key on the keyboard if the OSD is not open.
Scanning will stop at the currently selected server.
-or-
Press
Print Screen.
The Main dialog box will appear.
2. Click
Commands
. The Command dialog box appears.
3. Clear Scan Enable.
4.9 Broadcasting to Servers
The analog user can simultaneously control more than one server in a system, to
ensure that all selected servers receive identical input. You can choose to broadcast
keystrokes and/or mouse movements independently.
NOTE:
You can broadcast to up to 16 servers at a time, one server per ARI port.