background image

SERVSELECT™ IP INSTALLER/USER GUIDE

2

 

COMPLIANCE STATEMENTS 

3

Shielded cables must be used with this equipment to maintain compliance with radio 
frequency energy emission regulations and ensure a suitably high level of immunity 
to electromagnetic disturbances. This equipment has also been found to comply with 
European standards EN50082 and EN60950.

Japanese Compliance Statement

Other Agency Approvals

UL 1950, CSA C22. 2 No. 950, IEC 950 
Republic of Korea EMI Standard Certificate Number: E-F900-01-2012 (A)

TRADEMARKS USED IN THIS MANUAL

BLACK BOX and the

 logo are registered trademarks, and ServSwitch, 

ServSelect, and ServSelect IP are trademarks, of BLACK BOX Corporation.

Apple, Mac, and Macintosh are registered trademarks of Apple Computer, Inc.

IBM, PS/2, and RS/6000 are registered trademarks of International Business 
Machines Corporation.

Microsoft, HyperTerminal, Windows, Windows NT, and Windows XP are 
trademarks or registered trademarks of Microsoft Corporation in the United States 
and/or other countries.

Sun and Sun Microsystems are registered trademarks of Sun Microsystems, Inc. in 
the United States and other countries.

UL is a registered trademark of Underwriters Laboratories Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property 
of the trademark owners.

Summary of Contents for ServSelect IP KV120A

















































Reviews: