Black Box ServSelect IP KV120A, Manual

Page: 22 / 48

SERVSELECT™ IP INSTALLER/USER GUIDE
20
CHAPTER 4: ANALOG PORT OPERATION
21
Soft switching
Soft switching is the ability to switch servers using a hotkey sequence. You can soft
switch to a server by pressing
Print Screen
and then typing the first few characters
of its name or number. If you have set a Screen Delay Time and you press the key
sequences before that time has elapsed, the OSD will not display.
To configure servers for soft switching:
1. Press
Print Screen
to launch the OSD. The Main dialog box appears.
2. Click Setup - Menu. The Menu dialog box appears.
3. For Screen Delay Time, type the number of seconds of delay desired before the
Main dialog box is displayed after
Print Screen
is pressed.
4. Click OK .
To soft switch to a server:
1. To select a server, press
Print Screen
. If the display order of your server list is by
port (
Port
button is depressed), type the port number and press
Enter
.
-or-
If the display order of your server list is by name or EID number ( Name or EID
button is depressed), type the first few characters of the name of the server or
the EID number to establish it as unique and press
Enter
.
2. To switch back to the previous server, press Print Screen then Backspace .