Black Box ServSelect IP KV120A, Manual

Page: 34 / 48

SERVSELECT™ IP INSTALLER/USER GUIDE
32
CHAPTER 4: ANALOG PORT OPERATION
33
Figure 4-14. SAM Selection Dialog Box
5. Select a SAM to view and click the Version button. The SAM Version dialog
box appears. For more information on loading firmware, see Appendix A.
Figure 4-15. SAM Version Dialog Box
6. Click X to close the Version dialog box.
4.8 Scanning Your System
In scan mode, the appliance automatically scans from port to port (server to server).
You can scan up to 16 servers, specifying which servers to scan and the number of
seconds that each server will display. The scanning order is determined by placement
of the server in the list. The list is always shown in scanning order. You can, however,
choose to display the server’s name or EID number by pressing the appropriate button.
NOTE:
Scanning is only available to the local analog user.
To add servers to the scan list:
1. Press
Print Screen
. The Main dialog box will appear.
2. Click Setup - Scan . The Scan dialog box appears.