32
SCAN-LAN 80 CABLE SCANNER
Plug the other end of the cable into the Remote
Unit.
Test results will be shown in the display, with the
location of any wiring errors noted (refer to
Section
3.1
). The Scan-LAN 80 will rerun the Wire Map test
and update the display every two seconds.
3.2.2 L
ENGTH
T
EST
NOTE
The accuracy of cable-length measurements depends upon
the NVP value entered for the selected cable type. Although
the preset values will give reasonably accurate readings in
most cases, the NVP of your cable can be measured to
achieve maximum accuracy. See Chapter 5.
Connect the cable to the appropriate connector on
the Scan-LAN 80.
