20
SCAN-LAN 80 CABLE SCANNER
If the wiring is incorrect for the selected LAN
environment, this screen will appear:
This display means that because of faulty wiring, the
Scan-LAN 80 cannot measure Signal to Noise Ratio,
Near-End Crosstalk, or Attenuation. Length and
characteristic impedance will be measured. Press
any key to continue with Autotest.
Length
The length of each pair, including the distance to
any anomalies, is measured using the NVP setting
for the selected cable type.
TDR Scanning
NVP: 78.0%
STANDBY...
FAILS WIRE MAP
Unit cannot
measure SNR
Press any key
