Black Box RAS-PutIn, Installation And User Manual

Page: 57 / 93

5.5. ADMINISTRATION 45
left blank the default will be used.
ˆ
Nickname
You have registered this nickname during your manual registration with the Dynamic
DNS Server. Spaces are not allowed in the Nickname!
ˆ
Check time
RAS-PutIn card registers itself in the Dynamic DNS server at this time.
ˆ
Check interval
This is the interval for reporting again to the Dynamic DNS server by RAS-PutIn.
Note:
RAS-PutIn has its own independent real time clock. Make sure the time setting of RAS-
PutIn is correct. This can be achieved by configuring a timeserver (see Figure
5.18 on
page 42 )
Note:
RAS-PutIn registers itself to the Dynamic DNS server slightly different from the time
configured. To reduce load peaks on the server we add a random time (0-10 min) to the
absolute time value.
5.5.4 SNMP Settings
The following information is available via SNMP:
ˆ
Serial number
ˆ
Firmware version
ˆ
MAC address / IP address / Netmask / Gateway of LAN interface
ˆ
Configured users
ˆ
Currently active users with login time (login time is only valid if time is synchronized on
RAS-PutIn)
ˆ
Server’s power state
ˆ
The following actions can be initiated via SNMP:
ˆ
Reset server
ˆ
Power on/off server
ˆ
Reset RAS-PutIn
The following events are reported by RAS-PutIn via SNMP:
ˆ
Login trial at RAS-PutIn failed.
ˆ
Login trial at RAS-PutIn succeeded.
ˆ
Denying access to a particular action.
ˆ
Server was reset.
ˆ
Server was powered on/off.