PROTOCOL CONVERTER MODEL A/S-4
68
USSTAB = RJEINCDT
Table used by VTAM to interpret user logons
VPACING = 6
VTAM sends 6 RUs to NCP before response
ISTATUS = ACTIVE
LU comes up active, can be INACTIVE
——————- APPLICATION VTAM PARAMETERS ——————-
BUFFACT = 10
Parameter used with BUFFLIM
——————- JESX Parameters ——————
TERMINAL (3776)
RMTnnn
SNA Remote Terminal
LUTYPE 1
Logical Unit type 1 use SCS data
BUFFSIZE = 256 if MAXDATA = 265
Buffer size of terminal LU
512 if MAXDATA = 521
NOCMPCT
Compaction may not be used on this terminal
COMP or NOCOMP
Blank and multiple character compression may
or may not be used
CONDEST = nnn
Console responses are to be directed to another terminal
CONSOLE or NOCON
Device other than a console printer may or may not receive
console messages
(*) DISCINTV = 0
Terminal disconnect on idle condition, off
LINE = nnn
Logical connection between JESX and the terminal
NUMPR = 1
Number of logical printers at terminal
NUMPU = 1
Number of logical card punches at terminal
NUMRD = 1
Number of logical card readers at terminal
PASSWORD = cccccccc
Line password
ROUTECDE = nn
Specify that input from this terminal will have the return desti
nation specified
SETUPMSG
Message telling operator to mount special forms
SETUPINF
Message telling operator to mount special forms is displayed
at his terminal and not at host console, maybe SETUPACT
to display message at host also
