21
Standalone G-Converter
TECHNICAL: 0118 931 2233
Installation
Before installation, please refer to the safety warnings, approvals requirements and
EMC requirements in the appendices.
Supply Voltage and Connection
240V AC.
The Converter is AC powered by a “plug in” switched mode power supply that is provided
with the unit.
Environmental Considerations
The equipment must be operated under the following atmospheric conditions:
Temperature:
0 to 40 degrees centigrade.
Humidity:
0% to 90% non-condensing.
Mechanical Construction
The converter is housed in a plastic injection moulded enclosure. Four LEDs on the front
panel indicate the current status of the converter.
The G-Converter MUST be disconnected from the power supply before opening the unit or
changing any network connections.
Screws on the underside of the enclosure are removed using a Posidrive screwdriver to access
the interior.
The rear panel accommodates the link interface connectors, the D type 15 way socket for the
X.21 port and the regulated power supply connector.
For U.K. connection, screened BNC cables should be used, with the screen connected to
chassis at the TX connector only.
For EUROPEAN connection, un-screened RJ45 cables are suitable. The screen to chassis
links must be fitted in the
isolated
position.
