18
T1/E1 FIBEROPTIC LINE DRIVER
Figure 3-3. Installation of Two Units in a 19" Rack (a).
To install two units:
1. Attach a long side rail to each unit (right side for one unit, left side of the
other unit) using the 4 screws and flat washers supplied. The long side rails
must be attached in opposing fashion, with the narrow flange of the first rail
opposite the wide flange of the second rail.
2. Attach a short bracket to the other side of each unit using the 4 screws and
flat washers supplied.
Figure 3- 4. Installation of Two Units in a 19" Rack (b).
