17
T1/E1 FIBEROPTIC LINE DRIVER
1. To prepare the unit for rack installation, attach the two brackets to the side
walls of the unit. Each bracket is fastened by means of two screws (with
flatwashers), which are inserted into the two front holes on the wide wall
(nuts are already in place, on the inner side of the wall).
2. After attaching the brackets, the unit is ready for installation in the 19" rack.
Fasten the brackets to the side rails of the 19" rack by means of four screws—
two per side (included).
Figure 3-2. Installation of a Single Unit in a 19” Rack.
3.5.2 I
NSTALLATION OF
T
WO
U
NITS
The rack adapter components for two units include two long side rails (one for
each unit), which slide one within the other to fasten the two units together, and
two short side brackets which fasten the two units to the 19" rack (refer to
Figure 3-3
).
