41
CHAPTER 4: Configuration
Code Item
Description
3
PREPARE REMOTE MINISTAT-
Used to initiate preparation
FOUR CONFIGURATION
of remote MiniStat-Four
configuration, using the
terminal connected to the local
MiniStat-Four.
4
ACTIVATE REMOTE
Used to restart the remote
MINISTAT-FOUR
MiniStat-Four; if a new
CONFIGURATION
configuration was transferred
from the local MiniStat-Four to
the remote MiniStat-Four,
this command will activate the
new configuration.
Q
EXIT
Return to SYSTEM
CONFIGURATION menu.
Procedure:
Type the code number corresponding to the desired function.
Type
Q
to return to the SYSTEM CONFIGURATION menu.
20. TRANSFER CONFIGURATION FROM REMOTE TO LOCAL Screen
Purpose:
Provide an indication that the MiniStat-Four executes the required
actions after selecting item 1 on the REMOTE MiniStat-Four CONFIGURATION
menu (see subsection 19).
Description:
This screen is displayed after selecting item 1 on the REMOTE MINISTAT-FOUR
CONFIGURATION menu, while the remote configuration information is
transmitted to the local MiniStat-Four.
In most cases, the screen is displayed for a very short interval; however, under
certain traffic conditions, you might notice the transmission delay, so this screen
notifies you that the required action is being carried out:
