33
CHAPTER 4: Configuration
If you changed the rate of the command sub-channel (the sub-channel to which
you are now connected), reprogram your terminal for the new rate, so that you will
be able to continue.
After completing the required actions, type
Q
to return to the SUB-CHANNEL
CONFIGURATION screen.
NOTE
If you made an error and lost communication with the MiniStat-Four
being programmed, select the default configuration described in
Section 3.3 and start again.
8. DATA BITS Screen
Purpose:
View the current number of data bits used on this sub-channel and select,
if desired, a new value.
Description:
Code numbers 1 through 4 list the available selections for the number of data bits:
(1) five, (2) six, (3) seven, or (4) eight. Code Q is used to return to the
SUB-CHANNEL CONFIGURATION screen.
The CURRENT STATE line shows the code for the current number of data bits.
Procedure:
To change the number of data bits, type the appropriate code number. The new
selection appears in the CURRENT STATE line.
If you changed the number of data bits on the command sub-channel (the sub-
channel to which you are now connected), reprogram your terminal for the new
value, so that you will be able to continue.
After completing the required actions, type
Q
to return to the SUB-CHANNEL
CONFIGURATION screen.
