User Manual
5.5.5 LINERATE command
The LINERATE command determines the modem connection rate over the line. The number
parameters from 1 to 16 determine the connection rate.
NTU_CM>LINERATE 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line
Rate,kbit/s: 192
Master/Slave:
Slave
Adaptive
mode:
ON
Ethernet
Speed:
AUTO
Duplex
mode:
AUTO
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NTU_CM>LINERATE 16
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line
Rate,kbit/s: 2320
Master/Slave:
Slave
Adaptive
mode:
ON
Ethernet
Speed:
AUTO
Duplex
mode:
AUTO
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NTU_CM>
5.5.6 ADAPTIVE command
The ADAPTIVE command adjusts the line rate of the slave modem to the line rate of the master
modem. The line rates should be set equal on both modems.
NTU_CM>ADAPTIVE ON
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line
Rate,kbit/s: 2064
Master/Slave:
Slave
Adaptive
mode:
ON
Ethernet
Speed:
AUTO
Duplex
mode:
AUTO
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NTU_CM>ADAPTIVE OFF
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xDSL
Line
Rate,kbit/s: 2064
Master/Slave:
Slave
Adaptive
mode:
OFF
Ethernet
Speed:
AUTO
Duplex
mode:
AUTO
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Page 21 of 30
