User Manual
5 THE
COMMAND
SYSTEM
5.1 Basic
rules
After the command is typed, press <enter>.
The <Backspace> key is used to edit commands.
Some commands have the parameter <C> to update the information on the screen. This mode
starts acting after the command is entered. To exit from the mode press any key.
Each command has the (H)elp command to help the user and the (M)ain command to return to the
main menu.
5.2 The
main
menu
The main menu is the following:
MDSL
Ethernet Monitor V1.41
+------------------------+
| Main Menu |
+------------------------+
1. Performance management (PM)
2. Fault and maintenance management (FMM)
3. Configuration management (CM)
4. Security management (SM)
NTU> Select [1..4]:
The menu consists of four submenus. To choose the needed submenu, it is necessary to type its
number and press “Enter”. The main menu also contains information about the current version of the
firmware. It is important that you inform the service center about it when being consulted.
Page 13 of 30
