Parameter:
VPI/VCI:
Sets PVC with the VPI/VCI number.
UBR:
Sets the UBR priority.
CBR:
Sets the CBR priority.
VBR:
Sets the VBR priority.
VBRNRT:
Sets the VBR-NRT priority.
8.3.12.3 Setrip
command
The setrip command sets the RIP type for the used PVC.
> pppoa> setrip 1
> pppoa>
Command format: setrip <1|2|1&2|0>
Parameter:
VPI/VCI
Sets PVC with the VPI/VCI number
1: Sets
RIP1.
2: Sets
RIP2.
1&2: Sets
RIP1
и
2.
0:
RIP is not used.
8.3.12.4
8.3.12.4 Setwanip command
The setwanip command sets the IP address of the SHDSL (WAN) interface for the selected PVC.
> r1483> setwanip 8/35 216.71.89.12
> r1483>
Command format: setwanip [<vpi>/]<vci> <wanip[/<masknum>]> [llc/vcmux]
Parameter:
VPI/VCI:
Sets PVC with the VPI/VCI number.
Wanip:
Sets the IP address of the device WAN
interface.
Musknum:
Sets the mask number.
Llc/vcmux:
Sets the encapsulation type according
to RFC1483.
Version: 1.0
Page. 75 of 95
Summary of Contents for MDS920C-10BT
Page 37: ...Fig 16 MDS920C 10BT NG front panel Version 1 0 Page 37 of 95...
Page 39: ...Fig 17 MDS922AE 10BT front panel Version 1 0 Page 39 of 95...
Page 45: ...Version 1 0 Page 45 of 95 Fig 19 Command tree of bridge mode...
Page 46: ...Fig 20 Command tree of router mode Version 1 0 Page 46 of 95...
