Note!
The adaptive mode must be configured on the slave device. If the manual mode is
configured on the master device, the line rate will be set according to the fix parameter of
the master device. If the automatic mode is configured on the master device, the line rate
will depend on the DSL line quality.
8.2.13.7 Status
command
The status command displays the actual SHDSL connection status.
> shdsl> status
Config :
terminal – coe
Rate Mode – adaptive
Line Rate Range – MAX:2320 MIN:72
Status :
F/W Version : R1.2
Line Code : PAM(SHDSL)
SHDSL Standard: ANNEX B
Last Failed : No failure
Start Progress: PRE ACTIVATION
Attenuation : -NaNdB
Line Quality : InfinitydB
Avg Quality : InfinitydB
Receiver Gain : -InfinitydB
XMIT Power : 0.0dBm
Framer Status : Unknown(0x88)
Current Rate : 0
Line Status : Handshake
> shdsl>
Command format: status
Definitions:
Config:
The device configuration
Terminal:
The device type (Coe/CPe).
Rate Mode:
Line rate mode (Manual/Automatic).
Line Rate Range:
Line range rate in the automatic mode.
Status:
shdsl status.
Version: 1.0
Page. 61 of 95
Summary of Contents for MDS920C-10BT
Page 37: ...Fig 16 MDS920C 10BT NG front panel Version 1 0 Page 37 of 95...
Page 39: ...Fig 17 MDS922AE 10BT front panel Version 1 0 Page 39 of 95...
Page 45: ...Version 1 0 Page 45 of 95 Fig 19 Command tree of bridge mode...
Page 46: ...Fig 20 Command tree of router mode Version 1 0 Page 46 of 95...
