Command format: home
Parameter: no
8.2.3 Default command
The default command sets the default settings.
>> default
The data set to default successfully.
>>
Command format: default
Parameter: none
8.2.4 Lan command
The Lan command puts the system in the Ethernet submenu.
>> lan
> lan>
Parameter:
Setip: See
8.2.4.1
Show See
8.2.4.2
8.2.4.1 Setip command
The setip command sets the device IP address. This address is used for remote management of
the device over Telnet or HTTP protocols.
> lan> setip> 10.0.1.205 255.0.0.0
> lan>
Command format: setip <etherip[/<masknum>]> [subnet mask]
Parameter:
Etherip:
IP address of the device
Masknum:
Network mask number
Subnet mask Subnet mask
8.2.4.2 Show command
The show command displays the IP configuration of the device.
> lan> show
Ethernet ip: 10.0.1.205
Subnet mask: 255.0.0.0
Version: 1.0
Page. 48 of 95
Summary of Contents for MDS920C-10BT
Page 37: ...Fig 16 MDS920C 10BT NG front panel Version 1 0 Page 37 of 95...
Page 39: ...Fig 17 MDS922AE 10BT front panel Version 1 0 Page 39 of 95...
Page 45: ...Version 1 0 Page 45 of 95 Fig 19 Command tree of bridge mode...
Page 46: ...Fig 20 Command tree of router mode Version 1 0 Page 46 of 95...
