8.3.3.5 Show command
The show command displays the IP configuration over ATM.
> ipoa> show
IPoA setting:
FUNCTION VPI/VCI CLASS Wan IP/MaskNum GatewayIP RIP
IPoA 8/35 ubr 216.71.89.12/24 216.71.89.3 0
Command format: show
Definitions:
VPI/VCI:
Defines the used PVC with the VPI/VCI
number.
Wanip/MaskNum:
IP address/subnet mask
GatewayIP:
Gateway IP address.
RIP:
The used RIP
8.3.4 Lan command
The lan command puts the system into the menu of local Ethernet interface parameter settings.
>> lan
> lan>
Command format: lan [dhcpserver | setdhcp | setip | show]
Parameter:
Dhcpserver: See
8.3.4.1
Setdhcp: See
8.3.4.2
Setip: See
8.3.4.3
Show: See
8.3.4.4
8.3.4.1 Dhcpserver command
The dhcpserver command sets the operation mode of the in-built DHCP server.
DHCP Mode: Server.
Version: 1.0
Page. 66 of 95
Summary of Contents for MDS920C-10BT
Page 37: ...Fig 16 MDS920C 10BT NG front panel Version 1 0 Page 37 of 95...
Page 39: ...Fig 17 MDS922AE 10BT front panel Version 1 0 Page 39 of 95...
Page 45: ...Version 1 0 Page 45 of 95 Fig 19 Command tree of bridge mode...
Page 46: ...Fig 20 Command tree of router mode Version 1 0 Page 46 of 95...
