44
SECURE RACK MODEM
• Exit Command: The caller entered the
/X
command to exit from the
Secure Rack Modem Command mode.
• Invalid Password: The caller did not enter a valid password within the
allowed number of password attempts.
• Dialing Back: The Secure Rack Modem ended the connection in order to
perform a dialback operation. For more information on the dialback
function, please refer to
Section 7.2.3
.
• No Answer: The Secure Rack Modem has performed a dial back
operation, and the dialback number did not answer.
• Connection Lost: The party on the other end of the phone line has either
hung-up or unplugged the phone line.
• DTR Drop: The connection was terminated because the Secure Rack
Modem dropped the DTR signal, did not receive a DTR signal, or detected
a bad line.
• No Activity: The connection has timed out because of a lack of data
activity. For more information on the timeout feature, refer to
Section 5.2
.
7.5 The Utilities Menu
The Utilities menu allows access to a series of command functions that are related
to general operation and maintenance of the modem. To display the Utilities
menu, access the Secure Rack Modem Command mode as described in
Section 5.1
, then type
/U
and press
[Enter]
. The menu shown in Figure 7-2 will
appear. The various functions of the Utilities menu are discussed in the sections
that follow.
Figure 7-2. The Utilities Menu.
UTILITIES
1. Zero All Activity Counters
2. Delete Audit Log
3. Delete Entire Password Directory
4. Default Parameters
5. Send Test Message (ESC to Stop)
6. Upload Parameters
7. Download Parameters
8. Pass-Through (Console-Modem)
Enter Selection
Press <Esc> to Abort…