15
CHAPTER 3: Getting Started
Figure 3-1. The Secure Rack Modem Help Screen.
If the command prompt and Help screen are not displayed, check to make certain
that you’ve selected the correct communications parameters, cable connectors are
firmly seated, and that the cable has been connected to the COM port that is used
by your communications program.
When the “SRM>” command prompt is displayed, you can invoke the commands
listed in the Help menu to display the various configuration menus and status
screens. For this overview, we recommend only that you review the information on
each menu in order to familiarize yourself with the modem; you don’t need to
actually enter parameters at the configuration menus now.
1. View/Set General Parameters: From the command prompt, type
/G
and
press
[Enter]
. The General Parameters menu will be displayed. This menu is
used to set console port communication parameters, define the system
password, and select other general parameters as described in
Section 5.2
.
Press
[Esc]
to return to the main menu.
Secure Rack Modem
Version 1.11
Site: (undefined)
COMMANDS
/H
Display Help Screen
/C View Audit Log
/G
View/Set General Parameters
/U Utilities
/M
View/Set Modem Parameters
/X Exit/Disconnect
/E
Edit Password Directory
/D
View Password Directory
Modem Type:
V2.200-V34_AGF_DP1
Reset String:
ATZ
Init String:
AT&C1&D2E0Q1V1M1S0=1&Q%C3
Hang-Up String:
(undefined)
MODEM PORT SETTINGS
Baud Rate:
9600
Result Codes:
Verbose
Flow Control:
RTS/CTS
Speaker:
On
Local Echo:
Off
Error Control:
On
Rings to Answer:
1
Compression:
On
Quiet Mode:
On