3.2 Connecting to TP, Fiber Device
Converter TP Port 10/100 TP
AUTO, FORCE selectable: Bit 1, 2, 3 of S1
a. AUTO: 10/100 NWay Auto-negotiation
b. FORCE: 100 or 10, FDX or HDX
Converter Fiber Port 100FX
100Mbps duplex selectable: Bit 5 of S1
a. FDX for 100FDX fiber link partner, default
b. HDX for 100HDX fiber link partner
Figure 3-3 S1—Bit 1, 2, 3, 4, 5 configuration and setting
S1-1 TP port mode : AUTO(default) or FORCE
S1-2 TP port speed : 100 or 10 when TP at Force
S1-3 TP port duplex : FDX or HDX when TP at Force
S1-4 LFP : LFP enabled(default) or disabled
S1-5 Fiber port duplex : 100FDX(default) or 100HDX
NOTE
1. S1-2 and S1-3 will take effect only when S1-1 is set at TP-FORCE.
2. S1-5 must be set to 100FDX for Single Fiber Model.
Warning
When TP Nway port is connected to TP 100FDX(force mode) instead of
Nway partner, it will result in 100HDX mode with invalid collision
signal.
Ensure that all network nodes are configured at an identical operation
mode. Improper operation and flow control mode between TP and
Fiber port connections will render the LAN to work poorly.
PD PoE 10/100BASE-TX to 100BASE-FX Media Converter
10
Summary of Contents for LPD500A
Page 1: ...Copyright 2006 Black Box Corporation All rights reserved...
Page 3: ......