106
PURE NETWORKING 10/100 DESKTOP PRINT SERVER
9.2.8 C
ONFIGURING
DHCP P
ARAMETERS
The print server can be configured as a DHCP server (see Figure 9-10) to assign IP
addresses to other devices on the network.
Figure 9-10. DHCP Configuration screen.
The DHCP Configuration page allows you to set:
• The DHCP Server Startup. This determines if the print server will act as a
DHCP server. You can enable or disable this option, or set it to Auto. If this
item is set to Auto, the print server will detect if there is any other DHCP server
on the network when it boots up. If there is no DHCP server on the network,
then the print server will configure itself as a DHCP server; otherwise, it will
disable this function.
• DHCP Setting is used to configure TCP/IP parameters that will be assigned to
a DHCP client. If this item is set to Auto, the print server will determine all
TCP/IP parameters automatically; otherwise, you will configure the following
parameters:
• The Starting IP specifies the starting IP address for assigning to DHCP
clients.
• IP Range identifies how many IP addresses are available to DHCP clients.
• Net Mask lists the network mask.
Save to Print Server
PrintServer info
