83
8.9 DHCP Server Configuration
The print server can be configured as a DHCP server to automatically assign IP
addresses to attached devices.
Figure 8-9. DHCP Server Configuration screen.
The DHCP Cfg page allows you to set the DHCP startup. This determines if the
print server will act as a DHCP server. If this item is set to
Auto
, the print server will
detect if there is any DHCP server on the network when it boots up. If there is no
DHCP server on the network, then the print server will configure itself as a DHCP
server; otherwise, it will disable this function.
DHCP setup is used to configure TCP/IP parameters that will be assigned to a
DHCP client. If this item is set to
Auto
, the print server will determine all TCP/IP
parameters automatically; otherwise, you will configure the parameters described
in Table 8-9.
CHAPTER 8: Configuration Utility
