Black Box LEP0005A User Manual Download Page 81

Page: 81 / 114

PURE NETWORKING 10/100 DESKTOP PRINT SERVER

Table 8-6. Print Server network ability parameters.

Parameter

Description

Alias Name

This is the print server’s nickname.

Diagnostic Print Out

This determines whether or not a diagnostic printout

should be printed on the printer that’s connected to

the print server.

TCP/IP Support

This determines whether or not TCP/IP network

printing is supported.

NetWare Support

This determines whether or not NetWare network

printing is supported.

NetBEUI Support

This determines whether or not NetBEUI network

printing is supported.

Write

Press this button to save the configuration to the

print server.

Reset

Press this button to reset the print server to have the

changes take effect.

Click on this button to save your selections.

Cancel

Click on this button to cancel your selections.

Apply

This button is not used.

Help

Click on this button to view the help screen.

Summary of Contents for LEP0005A


















































































































Search results

Summary of Contents for LEP0005A

Reviews:

Black Box LEP0005A, User Manual, Page: 81 / 114

Search results

Summary of Contents for LEP0005A

Reviews: