Add/Delete Relay IP
Step 3: Press [+] on keypad to add a relay IP. Choose a suitable interface or
All Interfaces
from
Select Outbound
Relay Interfaces
.
Otherwise, you may press [-] on keypad to delete a relay IP.
DHCP Gateway Options
Step 4: Move to highlight
DHCP Gateway
and press <Enter>.
Decide to have it Disabled or Enabled.
Maximum Hops
Step 5:
Move to highlight
Maximum Hops
and press <Enter>
Step 6
:
Enter decimal number (1-16) to configure the maximum number of hops.
Delay (sec)
Step 7
:
Move to highlight
Delay (sec)
and press <Enter>.
Step 8
:
Enter decimal number (0-65535) configure the delay in seconds.
Preferred Server
Step 9
:
Move to highlight
Preferred Server
and press <Enter>.
Step 10
:
Enter IP address for the Preferred Server.
Step 11
:
To specify up to three more Preferred Servers, repeat the above steps.
* No precautionary message appears before you delete a relay IP.
* Be sure you want to delete it before doing so.
Summary of Contents for LBG1000A
Page 8: ......
Page 62: ...Manageable Gigabit Switch User s Manual 62 ...
