Black Box LBG1000A, Manual

Page: 61 / 142

Step 2: The screen shows a list of VLAN IDs, IP addresses, subnet masks, proxy ARPs, and RIPs currently
defined.
Step 3: Move to highlight the row that contains the parameters you want to change, and then press <Enter>.
Step 4: Move to highlight a parameter you want to change, and then press <Enter> for modifications.
Otherwise, you may press <-> to delete that parameter.
Initial IP Settings
Step 5: Move to highlight IP Address and press <Enter>.
Step 6: Type an IP address and press <Enter>
Step 7: Press <Esc> until you return to [Switch Management] screen.
Make sure you save the settings before you log out
ARP TABLE SETTING
Step 1: Move to highlight [ARP Table] from [IP Networking] and press <Enter>. The screen shows the ARP table
entries that have been defined or learned.
Before you can define a VLAN’s IP settings, you
must first create a VLAN as described in previous