Black Box LBG1000A, Manual

Page: 139 / 142

Bridge Groups Supported
The switch supports the following four groups of Bridge MIB (RFC 1493):
- The dot1dBase Group – a mandatory group that contains the objects applicable to all types of bridges.
- The dot1dStp Group – contains objects that denote the bridge’s state with respect to the Spanning Tree Protocol. If a node does
not implement the Spanning Tree Protocol, this group will not be implemented. This group is applicable to any transparent only,
source route, or SRT bridge that implements the Spanning Tree Protocol.
-
The dot1dTp Group – contains objects that describe the entity’s transparent bridging status. This group is applicable to
transparent operation only and SRT bridges.
- The dot1dStatic Group – contains objects that describe the entity’s destination-address filtering status. This group is applicable to
any type of bridge which performs destination-address filtering.