Black Box LBG1000A, Manual

Page: 47 / 142

SLIP
Step 6: Move to highlight SLIP and press <Enter> if you want to change it, Disabled or Enabled.
<Note> If you enable SLIP, a message tells you that the console port becomes accessible only through the SLIP protocol after you
logout from the current console screen.
SLIP Address
Step 7: Move to highlight SLIP Address and press <Enter> if you want to set it.
SLIP Subnet Mask
Step 8: When SLIP IP address is entered, move to highlight SLIP Subnet Mask and press <Enter>. Enter a
suitable subnet mask.
<Note> You must enter a SLIP address before you can enter a SLIP subnet mask.
Return to Basic Management
Step 9: Press <Esc> to return to [Basic Management] screen when completed.