724-746-5500 | blackbox.com
Page 16
ServView V KVM Tray
8. Slide out the drawer and then remove the four safety stoppers from the left and right sides of the KVM Tray in sequence. See
Figures 3-11 and 3-12.
+
+
+
+
Drawer
Safety
stoppers
Figure 3-11. Sliding the drawer out.
Figure 3-12. Removing the safety stoppers.
WARNING: The safety stoppers prevent the drawer from sliding out when in transit. Once you remove the safety stoppers, the
drawer may slide out and cause serious injury.
9. Connect the power supply to the power jack on the switch module. See Figure 3-13.
Power
connector
Figure 3-13. Attaching the power supply to the module.
To replace a module, follow Steps 5 and 6 on
pages 14–15
.