724-746-5500 | blackbox.com
Page 30
724-746-5500 | blackbox.com
Chapter 4: On-Screen Display
NOTE: Before changing the security level, set the configuration you wish to work with to the higher security level, under MODE >
START. This configuration will be maintained when ServSwitch 4site Flex is reset, in case of power failure, or when power is
turned off and on again.
SECURITY LEVEL 8
Security Level 8 allows you to work only on one channel (computer) in a predefined display mode (Quad, Full-Screen, or PiP
mode). No settings can be changed, apart from the SECURITY menu item, where you can change the security level.
SYSTEM
SECURITY
SECURITY LEVEL 7
With Security Level 7, you can open OSD windows that only show display modes and device settings.
SYSTEM
HDCP
CONSOLE
VIDEO OUTPUT/EDID
VIDEO
INPUT STATUS
COMPUTER
NAME 1-4/ KEYBOARD/MOUSE/EDID/DDC
HELP
HOTKEY/ABOUT/CONTACT
SECURITY LEVEL 6
With Security Level 6, you have the following additional operations:
SYSTEM
CONTROL
CONSOLE
FADE
• Setting of active channel using front-panel buttons, Hotkeys, or Hotmouse.
• Selecting channel with PiP button in Quad mode.
• Changing the directly selectable PiP channel in PiP mode single direct.
SECURITY LEVEL 5
With Security Level 5, you have the following additional operations:
• Setting of display mode (Quad/Fullscreen/PiP) using front-panel buttons, Hotkeys or Hotmouse.
SYSTEM
TEST PATTERN
CONSOLE
BACKGROUND
SECURITY LEVEL 4
With Security Level 4, you have the following additional settings in the OSD:
SYSTEM
OSD POSITION/WIN MODE
MODE
PIP/START
CONFIGURATION
RECALL
COMPUTER
AUDIO
VIDEO
FORMAT
• Modify display-mode settings in Hotmouse Menu.
• Changing both channels in Dual mode.
• Changing the fixed PiP channel in PiP mode.
