52
4-, 8-, AND 16-PORT SERVSWITCH EC SERIES IP KVM SWITCH
5.2 Selecting Computers Using On-Screen Display (OSD)
The ServSwitch can operate via an on-screen display (OSD). To use this option,
press the
Ctrl
key twice within two seconds to see the hotkey menu (an OSD
option) if it is enabled. Press the
Left-Ctrl
key three times within two seconds, and
a ServSwitch menu screen appears showing a list of the computers with
corresponding port numbers, names, and statuses. See Figure 5-2.
Figure 5-2. OSD screen.
Note also that the short form Hotkey menu can be turned on as an OSD function.
Just press the F4 key, then select More, then Hotkey menu. See Table 5-1 for
Hotkey commands.
Port channel
address
Highlighted by
arrow keys
Press Enter to go to
the slave screen
FINANCIAL-1F shown
in Figure 5-3.
Security
enabled port
Currently selected
channel address
To a 16-port slave
To an 8-port slave
Eye mark enabled
Summary of Contents for KV9304A
Page 2: ......
