Black Box KV6104SA-R2, Manual

Page: 80 / 98

79
CHAPTER 5: Operation
5.19.3 R
ESTORING THE
C
ONFIGURATION
To restore the saved/edited menu names and configuration settings from the PC to
the Duo/Quadro, first prepare your system:
• Make sure that copies of the SSWRITE.EXE program and the SSDATA.CSV
file are together in the same directory on the PC that will be attached to the
Duo/Quadro.
• Connect one of the PC’s serial COM ports to the Duo/Quadro’s COMM port
using the same serial cable you used to save the configuration (see Section
5.19.1 ) or an identical replacement cable.
Once this is done, take these steps:
1. Run the program SSWRITE.EXE on the PC attached to the Duo/Quadro and
follow the instructions the program gives you.
2. Log into the Duo/Quadro as ADMIN if you haven’t already done so.
3. From the Duo’s/Quadro’s main on-screen menu, press [F1] for MORE
MENUS.
4. Use the arrow keys to position the highlight bar over FUNCTIONS.
5. Press [Enter] or [Return] to view the FUNCTIONS menu.
6. Use the arrow keys to place the highlight bar over READ DATA FROM RS-232
PORT.
7. Press [Enter] or [Return] to trigger this function.
The Duo/Quadro should receive the configuration data from the PC and load the
new menu names and access rights into its on-screen menus.