49
CHAPTER 4: Configuration
4.7.11 OSD D
WELL
T
IME
Accessed through:
GLOBAL PREFERENCES
Possible settings:
1 SECOND; 2 SECONDS (factory default); 3, 5, and 10 SECONDS
After successfully switching to a different computer channel, the Duo/Quadro will
display a confirmation message for a few seconds. Set the length of time that this
message dwells (persists) on the screen to any of the possible settings listed above.
4.7.12 U
SER
T
IMEOUT
Accessed through:
GLOBAL PREFERENCES
Possible settings:
2 SECONDS (factory default); 5, 10, and 30 SECONDS; 1, 5, and
10 MINUTES
When two or more users select the same computer, only one can have keyboard
and mouse control of that computer at any one time, although in normal
circumstances all of them will see its video output (see
Section 4.7.5
). When no
keyboard or mouse data has been received from the active user port for the
duration of the user-timeout period, the Duo/Quadro will allow the first of the
other users who types at their keyboard or moves their mouse to take keyboard and
mouse control of that computer. That user then becomes the active user—until he
or she, too, times out.
You can set this user timeout to any of the possible settings listed above; try to
choose a timeout just long enough that your users can usually manage to avoid
interrupting each other’s work (but no longer than that).
If you have both a local and remote user station attached to user port #1 of a
Duo or Quadro or user port #3 of a Quadro, the local and remote users will
contend for access to the Duo’s/Quadro’s computers in the same way that user #1
and user #2 will contend for access if they select the same CPU. Accordingly, this
user timeout value also controls the timeout between the local and remote users on
user ports #1 and #3.
Summary of Contents for KV6104SA-R2
