background image

22

2.4 GHZ WIRELESS REMOTE UNIT WITH HOOKSWITCH

2.4 GHZ WIRELESS REMOTE UNIT WITH HOOKSWITCH

Capacity when fully charged and on-
line:

Minimum 12 hours

continuous use, without
recharging.

Capacity when fully charged and off-
line:

Minimum 80 hours without

recharging.

Recharging:

Maximum 3 hours to

completely recharge a discharged
battery. The battery will recharge
until fully charged and it cannot
be overcharged.

The remote is equipped with a
rechargeable nickel-metal-hydride
(NiMH) battery. If the battery is
recharged when not in use, and is
never completely discharged, it
should have a lifetime of about 2
years. 

Replace the enclosed battery only
with the same or equivalent type
of battery recommended by the

manufacturer. Please dispose of
batteries in an environmentally
friendly matter.

5.4 Calling Black Box

If you determine that your 2.4
GHz Wireless Wireless Remote
Unit or Hookswitch is
malfunctioning, do not attempt to
alter or repair the unit. It contains
no user-serviceable parts. Contact
Black Box at 724-746-5500.

Before you do, make a record of
the history of the problem. We
will be able to provide more
efficient and accurate assistance if
you have a complete description,
including:

• the nature and duration of

the problem.

• when the problem occurs.

• the components involved in

the problem.

• any particular application

that, when used, appears to
create the problem or make
it worse.

5.5 Shipping and Packaging

If you need to transport or ship
your 2.4 GHz Wireless Wireless
Remote Unit or Hookswitch:

• Package it carefully. We

recommend that you use
the original container.

• If you are shipping the

Headset for repair, make
sure you include everything
that came in the original
package. Before you ship,
contact Black Box to get a
Return Materials
Authorization (RMA)
number.

Summary of Contents for HS300A

























Reviews: