14
2.4 GHZ WIRELESS REMOTE UNIT WITH HOOKSWITCH
2.4 GHZ WIRELESS REMOTE UNIT WITH HOOKSWITCH
3.4 Before Setting Up to the Telephone
1. Make sure the
headset/handset selector
marked with the
30
icon
on top of the base is in the
headset position. The
selector is in the headset
position when the on-line
indicator (marked with the
4
icon) on the front of the
base lights up and the on-
line indicator on the top of
the remote is flashing. If the
lights are off, the selector is
in the handset position.
Press the handset/headset
selector once to activate the
headset (Figure 3-6).
Figure 3-6. Activating the Headset.
2. Make sure the mute
function on the remote is
off. If the mute button is on,
you will hear a double beep
in your headset every 5
seconds. Turn it off by
pressing the mute button on
the remote marked with the
6
icon once.
3. If your telephone has
volume control, set the
volume to mid-range.
Control the headset volume
through the remote.
3.5 Setting Telephone Compatibility
and Transmit Adjustments
3.5.1 S
TEP
1: S
ETTING
T
ELEPHONE
C
OMPATIBILITY
1. Put your headset on, lift the
handset from the telephone,
and listen for a dial tone in
your headset.
2. If there is no dial tone,
adjust the telephone
compatibility switch marked
A-G on the rear of the base.
Move from A to G until the
dial tone is clear. If the dial
tone is just as clear in
position A as in G, leave the
switch in position A. Most
phones will use position A
or position G (Figure 3-7).
