Black Box ACS411A-R2 User Manual Download Page 6

Page: 6 / 60

Page 6

724-746-5500 | blackbox.com

WEEE, RoHS, and Safety Instructions

WEEE

The manufacturer complies with the EC Directive 2002/96/EG on the prevention

of waste electrical and electronic equipment (WEEE).

The device labels carry a respective marking.

RoHS

This device complies with the EC Directive 2002/95/EG on the restriction of the

use of certain hazardous substances in electrical and electronic equipment (RoHS).

The device labels carry a respective marking.

Safety Instructions

To ensure reliable and safe long-term operation of your DVI Converter, note the

following guidelines:

Installation

• Only use in dry, indoor environments.

• The DVI Converter and the power supply units can get warm. Do not place

them in an enclosed space without any airflow.

• Do not place the power supply directly on top of the device.

• Do not obscure ventilation holes.

• Only use power supplies originally supplied with the product or manufacturer-

approved replacements. Do not use a power supply if it appears to be defective
or has a damaged case.

• Connect all power supplies to grounded outlets. In each case, make sure that

the ground connection is maintained from the outlet socket through to the
power supply’s AC power input.

• Do not connect the link interface to any other equipment, particularly network

or telecommunications equipment.

• Take any required ESD precautions.

Repair

• Do not attempt to open or repair a power supply unit.

• Do not attempt to open or repair the DVI Converter. There are no user

serviceable parts inside.

• Contact Black Box Technical Support at 724-746-5500 or [email protected] if

there is a fault.

Summary of Contents for ACS411A-R2





























































Search results

Summary of Contents for ACS411A-R2

Reviews:

Related manuals for ACS411A-R2

Brands by name

Popular brands

Black Box ACS411A-R2, User Manual

Search results

Summary of Contents for ACS411A-R2

Reviews:

Related manuals for ACS411A-R2

Brands by name

Popular brands