Page 50
724-746-5500 | blackbox.com
Chapter 5: Operation
1. Open the OSD with the infrared remote control.
2. Select “Input Settings” in the main menu (see Section 4.2.3).
3. Test the recommended resolutions that are listed in the menu item “Select
Resolution.” The menu item is inactive if there is only one recommended
resolution.
4. Run the automatic picture adjustment:
• Select “Picture Settings” in the main menu (see Section 4.2.2).
• Select the menu item “Auto Configuration.” The picture size might change.
5. Check the test picture: If the vertical lines are displayed clearly, without smear
or tremble, the setting is successful.
6. Exit the OSD. A window appears to save settings. This can take a few seconds.
7. Save the settings.
5.1.3 Optimization of Picture Settings
For certain analog input signals (VGA /RGB /EGA), if the picture quality is still not
satisfying after the automatic picture adjustment, you can adjust clock and phase
manually.
1. Select “Picture Settings” in the main menu.
2. Modify the values in the menu items “Clock” and “Phase” until all failures have
disappeared.
3. If the picture is displaced:
• Select the menu item “Display Position” in the main menu item “Output
Settings” and position the picture in the upper left corner of the monitor.
• Select the menu items “Width” and “Height” in the main menu item “Picture
Settings” and modify the values for width and height of the picture until the
monitor is completely filled by the picture.
4. Exit the OSD. A window appears to save settings. This can take a few seconds.
5. Save the settings.
5.2 Download of DDC Information
Loading DDC information is only relevant if you want to connect a DVI or VGA
source. By default, the factory DDC information is reported to the source
(computer, CPU). If these settings do not lead to a satisfying result, the DDC
information of the connected monitor can be downloaded and stored internally.
