background image

2

SCSI Fiber Optic Extender

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment generates, uses, and can radiate radio frequency energy

and if not installed and used properly, that is, in strict accordance with the

manufacturer’s instructions, may cause interference to radio

communication. It has been tested and found to comply with the limits for a

Class A computing device in accordance with the specifications in Subpart B

of Part 15 of FCC Rules, which are designed to provide reasonable

protection against such interference when the equipment is operated in a

commercial environment. Operation of this equipment in a residential area

is likely to cause interference, in which case the user at his own expense will

be required to take whatever measures may be required to correct the

interference.
Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.
“This digital apparatus does not exceed the Class A limits for radio noise

emission from digital apparatus set out in the Radio Interference

Regulation of the Canadian Department of Communications.”
“Le présent appareil numérique n’émet pas de bruits radioélectriques

dépassant les limites applicables aux appareils numériques de la classe A

prescrites dans le Règlement sur le brouillage radioélectrique édicté par le

ministère des Communications du Canada.”

TRADEMARKS

All applied-for and registered trademarks are the property of their

respective owners.
ST

®

is a registered trademark of American Telephone and Telegraph

Company.

Summary of Contents for ACI-2000A


















Reviews: