EN
G
LI
SH
ENGLISH
MAINTENANCE & CARE
FAUCET FUNCTIONS
19
20
21
22
23
18
19 VALVE FUNCTION
By lifting the Lever Handle (
19A
) up, the valve will be activated allowing water to flow.
The water flow will increase by continuing to lift up the Lever Handle (
19A
). By rotating
the Lever Handle counter-clockwise, the water temperature will decrease to cold flow
only. By rotating the Lever Handle clockwise, the water temperature will increased to
hot flow only.
20 SPOUT FUNCTION
The Spout (
20A
) can be rotated around the Faucet Body in any direction.
22 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (
22A
). Turn Valve (
22B
) on
and allow both hot and cold water to run for at least one minute each. While water is
running, check for leaks. To clean the aerator, disassemble Aerator Housing (
22A
) by
separating the Aerator Shell (
22C
), Basket (
22D
), and Washer (
22E
). Once parts have
been cleaned, reassemble by reversing steps.
21 SIDE SPRAY OPERATION
The Side Spray (
21A
) can be pulled forward to spray water in any direction. To activate
the Side Spray, press the Toggle Button (
21B
) located on the back of the Side Spray
(
21A
).
23 HANDLE REMOVAL
Turn off water before proceeding!
With valve in closed position, detach Decorative
Button (
23A
), unscrew Fastener (
23B
), and remove Handle Hub (
23C
) from Valve Stem (
23D
).
18 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
Note:
After installation is complete, flush faucet (
see step 22
).
6
HOT
COLD
ON
19A
22A
22C
23A
23B
23C
23D
22D
22E
22B
20A
21A
21B
19A