19
IMPORTANT NOTICE:
In order for this tool to be an effective paint stripper, it must produce extremely high temperatures. As
a consequence, the stripper is capable of igniting paper, wood, paint and varnish residue and similar
materials.
As you become more familiar with the tool and develop the proper technique, the danger of accidental
ignition will be greatly reduced. In establishing the proper technique, the best thing to do is practice!
Work on simple stripping projects, preferably outdoors, until you get a “feel” for how to use your
stripper safely and effectively.
As you practice, observe the following procedures for safety:
1.
Always be sure the tool is turned off and disconnected from power supply when unattended.
2.
Clean the scraper blade often during use. Built up residue on the blade is highly flammable.
3.
Experiment to find the optimum distance from the toolʼs nozzle to the surface being stripped. This
distance (usually 1-2 inches)(25-50 mm) will vary depending on the material being removed.
4.
Keep the heat gun moving ahead of the scraper blade at all times.
5.
As you work, clean up loose pieces of paint as they accumulate around the work area.
6.
When working indoors, keep away from curtains, papers, upholstery and similar flammable materials.
7.
Above all, remember that this is a serious power tool that is capable of producing excellent results
when used properly. Practice on simple projects until you feel comfortable with your stripper. Only
then will you have mastered the proper technique.
Persons removing paint should always follow these guidelines:
1.
Move the work piece outdoors. If this is not possible, keep the work area well ventilated. Open the
windows and put an exhaust fan in one of them. Be sure the fan is moving the air from inside to
outside.
2.
Remove or cover any carpets, rugs, furniture, cooking utensils, and air ducts.
3.
Place drop cloths in the work area to catch any paint chips or peelings. Wear protective clothing
such as extra work shirts, overalls and hats.
4.
Work in one room at a time. Furnishings should be removed or placed in the center of the room
and covered. Work areas should be sealed off from the rest of the dwelling by sealing doorways
with drop cloths.
5.
Children, pregnant women or potentially pregnant women and nursing mothers should not be
present in the work area until the work is done and all clean up is complete.
6.
Wear a dust respirator mask or a dual filter (dust and fume) respirator mask. These masks and
replaceable filters are readily available at major hardware stores. Be sure the mask fits. Beards
and facial hair may keep masks from sealing properly. Change filters often. Disposable paper
masks are not adequate.
7.
Use caution when operating the heat gun. Keep the heat gun moving as excessive heat will
generate fumes which can be inhaled by the operator.
8.
Keep food and drink out of the work area. Wash hands, arms and face and rinse mouth before
eating or drinking. Do not smoke or chew gum or tobacco in the work area.
9.
Clean up all removed paint and dust by wet mopping the floors. Use a wet cloth to clean all walls,
sills and any other surface where paint or dust is clinging. Do not sweep, dry dust or vacuum. Use
a high phosphate detergent or trisodium phosphate (TSP) to wash and mop areas.
10.
At the end of each work session put the paint chips and debris in a double plastic bag, close it
with tape or twist ties, and dispose of properly.
11.
Remove protective clothing and work shoes in the work area to avoid carrying dust into the rest of
the dwelling. Wash work clothes separately. Wipe shoes off with a wet rag that is then washed
with the work clothes. Wash hair and body thoroughly with soap and water.
WARNING: Use of this tool can generate and/or disperse dust, which may cause serious
and permanent respiratory or other injury.
Always use away from face and body.
WARNING: ALWAYS use safety glasses. Everyday eye glasses are NOT safety glasses.
ENGLISH
