8
9
S T A N D B Y/P O W E R O N/P A U S E
Sleep Mode:
When the oven is not in use, the digital display and start/stop light
are off. If the oven is not in use and the controls are not touched for 5 minutes, it
will go to sleep.
Standby Mode:
When you press any of the buttons or turn any of the dials, the
digital display illuminates and the start/stop light flashes. This indicates the oven
is ready to be started. If the timer is at 0:00, the start/stop light will remain unlit
and you’ll need to put time on the oven before starting the oven.
Power On:
When you have selected your desired function and cook time and
press the start/stop button, the oven will power on and the start/stop light will
illuminate. After 30 seconds, the heating elements will glow. During operation,
the heating elements will cycle on and off to maintain the desired temperature.
Add Time:
To add time while the unit is running, turn the time/temp knob to
add more time.
Change Temperature:
To change the temperature while the unit is running
(in most functions), press the time/temp knob to toggle to the "TEMP"
setting then turn the time/temp knob to change the temperature.
Pause:
When the start/stop button is pressed before the timer reaches zero,
the heating elements turn off. The start/stop light flashes. The display shows
the time left on the cooking cycle. To restart the cooking cycle, press the
start/stop button and the start/stop light illuminates and the timer starts
again.
D I G I T A L D I S P L A Y
When the digital display is showing temperature, "TEMP" is illuminated. When
it is showing time, "TIME" is illuminated. Toggle between showing time and
temperature by pressing in the time/temp knob.
Display while setting time:
The display shows minutes
using the last two digits.
Display while cooking:
For all functions, except for
dehydrate, the display shows minutes when above 20, up
to a maximum of 90 minutes. Below 20 minutes, the display
shows minutes and seconds.
TOD6020BC_29094_EF_IB_B.indd 8
TOD6020BC_29094_EF_IB_B.indd 8
12/16/21 5:03 PM
12/16/21 5:03 PM