Page 13
Pictures are for illustration purpose only. Your model may or may not have all the features.
CONTROL PANEL
OPERATING FROM THE CONTROL PANEL
The Control Panel enables you to manage all the main functions of the appliance,
but to fully exploit its potential, you must use the remote control.
TURNING THE APPLIANCE ON
•
Plug into the dedicated electrical outlet.
• Press the button until the appliance comes on. The last function active when
it was turned off will appear.
* Never turn the air conditioner off by unplugging from the outlet. Always press
the button , then wait for a few minutes before unplugging. This allows the
appliance to perform a cycle of checks to verify operation.
Note:
Before pressing Power On button make sure the condensate drain plug in
the rear of the unit is securely in place to avoid any leaking.
•
Press the MODE button until the light corresponding to the required Mode
lights up.
SET UP & USE
FULL Tank
Indicator Light
Timer
Indicator
Light
Fan Speed
Indicator Lights
Selected Mode
Indicator Lights
Decrease
Temperature
Button
Mode
Selection
Button
Fan Speed
Selection
Button
Increase
Temperature
Button
Power Button
Timer Button
Display Area
COOL
FAN
DEHUMIDIFY
