BJ Live BJ CONTROL PRO, User Manual

Page: 21 / 24

BJ-256 BJ Control Pro
User Guide
BJ-256 BJ Control Pro
Page 21
 Do not disassemble, modify or repair the device. Any changes or
modifications made to your device could void the warranty.
 Do not paint your device or attach stickers to it.
 When cleaning the device:
o
Use a towel or soft cloth to clean the device and charger.
o
Do not use chemicals, detergents or solvents.
 Do not use it for any purpose other than that for which it was designed.
 The device is not a toy. Do not allow children to play with it because they
could hurt themselves and others or damage the device.
 Only allow qualified professionals to service your device.
Medical devices
 Radio equipment can interfere with the functioning of medical devices that
are not suitably protected. Consult a physician or the manufacturer of the
medical device to determine whether it is adequately shielded from external
radio frequency energy.
Implanted medical devices
 Manufacturers of medical devices recommend a minimum separation of 15.3
centimetres (6 inches) between a wireless device and an implanted medical
device such as a pacemaker or implanted cardioverter defibrillator, to avoid
potential interference with the medical device. Persons who have such
devices should:
 Always keep the wireless device more than 15.3 centimetres (6 inches) from
the medical device.
 Not carry the wireless device in a breast pocket.
 Move the wireless device away if there is any reason to suspect that
interference is taking place.
 Follow the manufacturer directions for the implanted medical device.
 If you have any questions about using the wireless device with an implanted
medical device, consult your doctor.
Operating environment
 During infrared recording, make sure that there is nothing nearby
generating an infrared signal. Note that some types of fluorescent lighting
emit infrared signals.
 Other products that use the same frequency band (433 MHz) as this remote
control can interfere with the control of the receivers. Make sure that neither
the remote nor the receivers are located near these sources.