BJ-256 BJ Control Pro
User Guide
BJ-256 BJ Control Pro
Page 9
Until this key is activated, the remote will remain permanently in the selected level.
Once a level has been selected, the programming and operation of the remote are
as described in sections 1 and 3 of this manual.
NOTE
: If code 300 was recorded in one of the 15 programmable keys, that key can
also be used to change levels.
3
Programming
To get the most out of your remote, you need to programme each key with the
desired functions. For example, key 1 could be programmed to set off an alarm,
and keys 2 and 3 to turn the volume on the television up and down.
How they are programmed depends on the type of device you wish to control, i.e.
whether it is a BJ System receiver or a device that works with infrared (devices that
already have a remote control, like televisions, DVD players, stereos, etc.).
The keys are programmed in the same way regardless of how they are activated,
i.e. regardless of whether you operate the control by direct touch or by scanning.
3.2
Programming for BJ radio frequency receivers
To control BJ System receivers, you must assign the RF code identifying the
receiver to the key on the remote that will be used to operate this receiver.
Once you have the information on the code to programme, follow these steps:
1.
Choose the level you require.
2.
Select the programming mode on the remote.
3.
Choose the key you wish to programme.
4.
Save the code to programme.
IMPORTANT:
The RF code programmed into the remote must always be a three-
digit number, so if the code indicated for the receiver only has 2 digits, add a 0 in
front. For example, if you have a receiver for a socket with the code 37,
programme the remote with the code 037.
ADDITIONAL INFORMATION:
What is an RF code?
For a remote to control the various receivers you have installed, each
receiver must be identified by a code that differentiates it from the others.
Hence, each receiver has an "RF code selector" that allows you to assign a
code to it. By programming this code in the BJ System remote, you can
control each of the receivers you have installed. See the user manual of
the receiver you wish to control to find out its RF code.
Summary of Contents for BJ CONTROL PRO
Page 24: ......
