Bizerba GSP H, Instruction Manual

Page: 9 / 92

Instruction manual GSP About this machine
38107010002 en-US 9 / 92
2.2 Machine description
Designations or versions
GSP H = Manual gravity feed slicer
GSP H W = Manual gravity feed slicer with portion scale
GSP H Flex = Combination of metrologically approved PC scale and manual gravity feed
slicer
GSP HD = Automatic gravity feed slicer
GSP HD W = Automatic gravity feed slicer with portion scale
Drive
The blade of this gravity feed slicer is operated electrically. The low-noise, low-maintenance
drive is effected via an AC motor.
The blade drive can be switched on/off via the membrane keyboard. [
}
30] to [
}
33]
Keys green = < I >, red = < O > have a signal lamp for activation control (GSP H, GSP HD). For
the red key a reduced operating force is needed reacting at a slight touch.
Further function keys are integrated in the membrane keyboard, e.g. number of carriage
strokes and stroke width for motor-driven carriage (GSP HD, GSP HD W).
The contactor control with self-locking circuit prevents automatic restarting after a power cut.
Carriage
Since the carriage with product and product holder are at an angle the product is fed towards
the blade by means of the product's own weight.
A carriage inclination between 0° or 18° with a low depositing height and 25° with low or high
depositing height (GSP H, GSP HC) can be chosen.
Also a carriage inclination between 18° with a low depositing height and 25° with low or high
depositing height (GSP HD, GSP HDC) may be selected.
The carriage is optionally available as one part made of anodized aluminum with Ceraclean
finish (GSP HC).
The one-piece carriage has an inclination of 25°.
For better gliding of the product, parts which are in contact with the product to be sliced are
provided with grooves.
A slice thickness setting below "0" unlocks the tilting lock of the carriage. This allows the car-
riage to be tilted to the outside in any position.
Scale
The slicers GSP H W, GSP HD W are fitted with a scale which is not metrologically ap-
proved. The portion scale is not metrologically approved and cannot be used for legal for
trade applications.
Slicer GSP H Flex with connected metrologically approved scale allows sliced product to be
weighed at the same time.
Materials
The complete machine housing as well as the gauge plate, blade cover and carriage, are
made of anodized aluminum. Optionally the surface can have a Ceraclean finish (GSP HC,
GSP HDC).