Bizerba GSP H, Instruction Manual

Page: 51 / 92

Instruction manual GSP Operation
38107010002 en-US 51 / 92
The value can be changed by moving
the control knob in the desired direction.
To adopt the value press <Enter>.
To cancel the action press <X>.
Fig. 60: Change of preset parameter values
The changed values are saved with <En-
ter>.
Press the upper right icon to exit the
menu without saving.
Fig. 61: Blade speed
Stroke width
Press and hold button for stroke width
for more than 1.5 seconds.
The preset values are displayed in per-
cent.
The carriage position is displayed in per-
cent.
Fig. 62: Stroke width
Press the carriage icon.
The current carriage position will be
adopted.
Press a value and hold for more than 1.5
s.
The image to change the parameter
value is shown.
Fig. 63: Change of preset parameter values