Bizerba GSP H, Instruction Manual

Page: 48 / 92

Operation Instruction manual GSP
48 / 92 38107010002 en-US
Slicing to target weight
In manual mode
Switch to manual mode by tapping the
lower left button .
Switch to slicing to target weight by tap-
ping the lower right button .
Select the blade speed by tapping button
.
Select a target weight via the direct se-
lection keys .
Fig. 52: Manual operation to target weight
or
Press and hold the target weight for
more than 1.5 seconds and enter the
weight via the displayed numeric key-
pad.
Press <Execute>.
Blade rotates.
Using the handle, move carriage uni-
formly forth and back.
The current weight value is constantly dis-
played according to the load.
Fig. 53: Target weight input via numeric keypad
Machine does not stop when reaching the target weight.
In automatic operation
Switch to automatic mode by tapping the
lower left button .
Switch to slicing to target weight by tap-
ping the lower right button .
Select stroke width , number of car-
riage strokes and blade speed by
tapping the relevant button.
Select a target weight via the direct se-
lection keys or via the numeric key-
pad.
Press <Execute>.
Blade rotates. Carriage starts moving.
Fig. 54: Automatic operation to target weight
Once the target weight is reached, the machine stops the slicing procedure.
If the weight does not increase after several strokes, the machine stops the slicing procedure.
(product to be sliced used up)